Part #: ALD4011-13

Double Urethane Transit Car Wheel Chock, Flush Rail

Double urethane transit car railroad wheel chock features a resilient double chock with fiberglass handles for use with transit and passenger cars. Not recommended for heavy freight cars or where excessive vibration takes place. For flush rail on flat track only. Do not use on grades. Rail surface must be clean. Do not install this product on oily or greasy rail – product may slip. Tension cord is sized to fit minimum 28-inch diameter wheel and can be stretched to accommodate up to a 36-inch diameter wheel. Product of Aldon® Company.

Key features

Default Feature icon

This product is manufactured by Aldon® Company.

Default Feature icon

Bring slow-moving car to a stop by thrusting urethane wedge several times in front of the car wheel. With each thrust, some of the forward momentum is absorbed.

Default Feature icon

The wedge will hold the wheel temporarily until a steel wheel chock can be installed.

Default Feature icon

A useful means of car control when moving freight cars with a car puller.
Use on flat track only.

See also

Double Wheel Chock with Tightener, Padlock and Flag Double Wheel Chock with Tightener, Padlock and Flag
Double Wheel Chock with Tightener, Padlock and Flag

Double, all steel, railroad wheel chock with replaceable rail biting spurs includes a tightener, padlock and flag. Type "C-2" for...

Whack ‘Em Double Wheel Chock, Flush Rail Whack ‘Em Double Wheel Chock, Flush Rail
Whack ‘Em Double Wheel Chock, Flush Rail

Whack 'Em double railroad wheel chock with replaceable rail biting spurs. For flush rail. Severe duty wheel chocks have reinforced...

Severe Duty Cushioned Car Stop Severe Duty Cushioned Car Stop
Severe Duty Cushioned Car Stop

Severe-duty cushioned railroad car stop, CS-4. Uses the cushioning capacity of the tie and a wheel-bump feature to lift the...