Track Gauge Spreader
Track gauge spreader (head of rail contact, not insulated) grabs rail head to pull or push rails into desired gauge. Can be used in both regular track and within switches. One end of the spreader has a double jaw, one of which is offset to lift spreader above switch point or heel block. Gauge adjustment range of 16-inches. Reversible ratchet wrench with flip key to change movement direction. Useful for correcting track after derailment and when installing gauge rods. Weight: 24 pounds. Product of Aldon® Company.
See also
9/16-Inch Round Shank Drift Pin, 11-Inch
9/16-Inch Round Shank Drift Pin, 11-Inch
Steel drift pin with 9/16-inch round shank and 11-inches Long. Rail handling track tool. Weight: 5 pounds. Product of Aldon...
Track Gauge Spreader, Base of Rail
Track Gauge Spreader, Base of Rail
Track gauge spreader (base of rail contact, not insulated) grabs rail base to pull or push rails into desired gauge....
Single End Gauge Rod
Single End Gauge Rod
Non insulated single end gauge rod. Hold track to gauge by preventing rails from spreading or tilting. Single end gauge...