Track Gauge Spreader, Base of Rail
Track gauge spreader (base of rail contact, not insulated) grabs rail base to pull or push rails into desired gauge. Can be used in both regular track and within switches. One end of the spreader has a double jaw, one of which is offset to lift spreader above switch point or heel block. Gauge adjustment range of 16-inches. Reversible ratchet wrench with flip key to change movement direction. Useful for correcting track after derailment and when installing gauge rods. Weight: 24 pounds. Product of Aldon® Company.
See also
Double End Gauge Rod
Double End Gauge Rod
Non insulated double end gauge rod. Hold track to gauge by preventing rails from spreading or tilting. A pair or...
Wooden Tie Plugs
Wooden Tie Plugs
Extend the life of your cross ties and insure good spike hold by inserting tie plugs into worn spike holes....
Single End Gauge Rod
Single End Gauge Rod
Non insulated single end gauge rod. Hold track to gauge by preventing rails from spreading or tilting. Single end gauge...