Self Tightening Car Stop
Self tightening car stop, CS-2. Car stop is assembled on head of rail by tightening 5 bolts, and driving the wedge from the rear. Tighten bolts periodically and re-hammer wedge if loosened. Stop stands 15-inches above rail. Weight: 107 pounds. For exposed rail track. Car stops are for flat track only. Car stops must be used in pairs. Use bumping post inside building. Product of Aldon ® Company.
Key features
This product is manufactured by Aldon® Company.
Save your back and protect your rail siding.
Foot operated spring action to raise and lower sign holder.
Can be padlocked in up and down positions.
See also
Hinged Locking Car Stop, Right
Hinged Locking Car Stop, Right
Right hand hinged locking car stop, C5-3X. Stops are bolted through web of rail. Equipped with padlock for locking in...
Hinged Locking Car Stop, Left
Hinged Locking Car Stop, Left
Left hand hinged locking car stop, C5-3X. Stops are bolted through web of rail. Equipped with padlock for locking in...
Severe Duty Cushioned Car Stop
Severe Duty Cushioned Car Stop
Severe-duty cushioned railroad car stop, CS-4. Uses the cushioning capacity of the tie and a wheel-bump feature to lift the...