Eduction Tube 3″x2″x3 1/2″
UHMWPE, SS and PTFE, 3″x2″ 150 lb Flanges, 3″ Flange Thickness, Ø3 1/2″ Outer Diameter x Ø2 1/2″ Inner Diameter, 116″ Long from the Bottom of the Flange, Flex End for Finished Tube Length of 128″ to 133 1/2″, Serrated Gasket Surfaces, For Non-Flammable Service Only, Patent No. 8,894,102 B2, AAR Approval # E-099032
CAD Drawing
Download CADKey features
Seamless construction and maintenance free UHMWPE dip tubes are corrosive resistant for use in the Chlor-Alkali chemical industry.
Economical, flexible and lightweight; can be easily installed by one worker. Can be cut to fit on location.
Produced from UHMWPE (UHMWPE) and Teflon®, making tubes six times more abrasive resistant than steel dip tubes.
Flex end on the tube eliminates the need for saddle/pipe guide.
Concentric serrations on the flange enables positive sealing of gaskets.
Available in a variety of sizes, flanges can be constructed to suit any inlet/outlet application.
Low profile reducing flanges (strike tubes) also available.
Kynar® coated flange also available for maximum corrosion resistance.
Wide Temperature Ranges: Pipes and flanges can withstand temperatures between -300° F and +180° F (-184° C to 82° C)Optional Flex End is FEP (Teflon®) and can withstand temperatures between -300° F and +400° F (-184° C to 204° C
See also
Eduction Tube with Reducing Flange, 4 inch x 2 inch, 3 1/2 inch diameter pipe, 110 inches long
Eduction Tube with Reducing Flange, 4 inch x 2 inch, 3 1/2 inch diameter pipe, 110 inches long
UHMWPE, SS and PTFE, 4"x2" 150 lb Flanges, 8x 3/4" Slotted Bolt Holes on a 7 1/2" to 7 3/4"...
Eduction Tube 8″x4″x5″
Eduction Tube 8″x4″x5″
UHMWPE, SS, 8"x4" 150 lb Flanges, 2 1/2" Flange Thickness, Ø5" Outer Diameter x Ø4" Inner Diameter, 90" Long from...
Eduction Tube 4″x3″
Eduction Tube 4″x3″
UHMWPE, PTFE, 4" 150 lb Flange, 8x 3/4" Slotted Bolt Holes on a 7 1/2" to 7 3/4" Bolt Circles,...