30-Inch Vented Hatch Cover, Salco
Salco Products (VPHC3007SAL) 30-Inch Vented Hatch Cover, Trinity Style, is made out of gray HDPE material, and includes a white FDA TPV gasket. Comes with an arm assembly that is made out of aluminum, and connected to the center of the hatch cover with 2 stainless steel bolts. Fits Salco’s hatch cover ring arrangement (HCR30A).
CAD Drawing
Download CADKey features
Lightweight HDPE. Significantly lighter than steel and fiberglass hatch covers at only 26 pounds.
UV stabilized material is effective in all climates and weather conditions.
Hatch covers remain sealed during unloading. A full half-inch deflection on the gasket provides a uniform seal around the circumference of the hatch cover.
Hardware available for all major car manufacturers.
Properly used, will eliminate roof implosions.
Saves time, labor, and reduces accidents. No workers required on the roof during unloading.
Specifications
See also
Trough Hatch Cover Center Section
Trough Hatch Cover Center Section
24 inches wide x 11 feet long straight-end trough hatch cover. Stainless Steel brackets. Regular bumper profile. Check out...
30-Inch Non-Vented Hatch Cover
30-Inch Non-Vented Hatch Cover
Salco Products (PHC3007TPS) 30-Inch Non-Vented Hatch Cover is made out of HDPE material and includes a white FDA TPV gasket....
Vented Hatch Cover 30″
Vented Hatch Cover 30″
HDPE, White FDA TVP Gasket, Alum Arm